Cantilever (C) Series Lift

CIP's Cantilever style material lifts are designed to work in low overhead areas and are constructed from structural steel utilizing a 100% duty-cycle brake motor mounted at the top of the unit. The low noise all-mechanical drive system safely transports the carriage and the load with ease by using dual or quad lifting chains. Our quality design provides a reliable means for moving material to a mezzanine or multiple levels/floors. These lifts require very little maintenance and have increased longevity over hydraulic lifts.

Lift material up to 5,000 lbs to vertical heights up to 100'. Platform sizes up to 8' x 8'. Special sizes, capacities and travel heights may be available.

All chain operated lifts are equipped with a broken chain brake to prevent the carriage from falling in the unlikely event of a chain failure. Mechanical interlocks prevent doors from being opened when the carriage is not present at that level. An electric brake motor secures carriage in the event of a power failure and prevents the platform from drifting.

The carriage is available in three load pattern configurations: C, Z & 90. Standard units have expanded metal platform side panels on all on operating sides and a snap chain across the access side(s).

Operation is controlled by an Illuminated Call/Send Station mounted next to each door at each level. Each station is also equipped with a large E-Stop button to stop the unit in an emergency.